Flight Video Download

Wing Span:   36"
Length:   24"
Weight:  9.5 to 13 oz.
Wing Area:   185 sq. inches
Wing Loading:   7.4 to 9.3 oz
Aspect Ratio:   7:1
Airfoil:  Modified DS19
Wind Range:  9 to 30 mph

The Wyoming Wind Works Slope Monkey utilizes traditional EPP foam construction to yield a tough, nimble, fast, and, highly aerobatic fun-ship.  With the Slope Monkey you can also DS those micro spots with a tight groove.  The kit builds quickly to get you monkeying around in a wide variety of wind conditions.

KIT CONTENTS
CNC cut EPP Wing Halves, EPP Fuse, Carbon Ribbon Spars, Pre-cut 1/8" Balsa Stabilizer and Elevator, Pre-cut 1/8" Vertical Fin, Tapered Balsa Ailerons, Elevator Pushrod & Housing, 3 Music Wire Control Horns, Aileron Pushrods, 2 Mini Servo E/Z connectors, Servo saver control horn connection material., 3"x3" 3/32 balsa radio equipment covers, Detailed written instructions with pictures

MATERIALS NEEDED
Basic Hobby Hand Tools, 3M Super 77 Spray Adhesive, 3M Extreme Bi-directional Packing Tape, 5 minute Epoxy, Thin CA Glue, Hot Glue Gun, Household Goop, Low-temp Covering material (We recommend Ultracote by Hanger 9) and application iron, Radio Equipment

Instructions Download (.pdf)

RADIO GEAR (not included)
Square 4.8 volt AAA battery pack, (3) 9 gram servos, micro 6 channel receiver, short servo extension, and Transmitter with following Capabilities:

Dual Servo Wing Mixing, Camber Mixing, Crow Mixing, Differential  Aileron Mixing, Elevator to Flap Mixing (Snap-Flap).  The Slope Monkey can be flown with a basic 4 channel system using a Y-harness for the wing servos.

+ shipping

+ shipping